Symmetricom Time Server User Manual download pdf (Page 96)

4-82 TimeVault™ User’s Manual 6000-100Ch4.fm Rev. D

Chapter 4: Serial or Telnet I/O Functions Extended Function Commands

As a safety feature, after sending this command, you have 10 seconds to respond

affirmatively (enter the letter “y”) to the confirmation prompt, after which the unit

executes the command and resets. Within that 10 second time period, any other response,

including no response, results in the unit canceling the command.

Unit example execution:

RESET BURN_DISABLE_BIT = 0

If you are in normal mode and you try to reset the burn host lock, you will get a friendly

reminder:

Command Canceled

BURN_DISABLE_BIT = 1

Bootloader Mode Required

Reboot while holding SAVE key

4.4.24 F100 PRESETALL - Password Reset All

Use Password Reset All when you want to set passwords back to the factory defaults.

To reset all the passwords to factory defaults, send the following command:

F100 PRESETALL<Enter>

The unit responds:

Are you sure? (y/N)

If you answer “y” and press Enter, the unit executes the command.

As a safety feature, after sending this command, you have 10 seconds to respond

affirmatively (enter the letter “y”) to the confirmation prompt, after which the unit

executes the command and resets. Within that 10 second time period, any other response,

including no response, results in the unit canceling the command.

Unit example execution:

Flash memory writing in progress:

Default user name and password set: 2

Default user name and password set: 1

4.4.25 F100 PN - Password System User Name Change

Use Password System User Name when changing the login user name.

To change the login user name, send the following command:

F100 PN<Enter>

The unit responds:

User Name Change for xyz123

Enter new user name:

PRESETALL is a case-sensitive command. When entering this command, use all capital

letters.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 147 148

No comments

Symmetricom Time Server User Manual Page 96