Symmetricom Time Server User Manual download pdf (Page 79)

6000-100Ch4.fm Rev. D TimeVault™ User’s Manual 4-65

Extended Function Commands Chapter 4: Serial or Telnet I/O Functions

change the user name and password to whatever you want. Then you can go back into

normal mode the and the user name and password you just set will work.

4.4.9 F100 ST – Self Test Status

Use Self Test Status to query the status of the power-up tests. The response contains the

PASS/FAIL status of the flash memory checksum test, RAM test, Utility Port test, and

version check.

To query the self-test status, send the following command:

F100<SP>ST<Enter>

where:

F = ASCII character F

100 = unit function number

<SP> = space

ST = specify ST command

<Enter> = input line terminator

The unit responds:

F100<SP>ST<SP>FLASH/CRC<SP>:<SP><STATUS>,<SP>RAM<SP>:

<SP><STATUS>,<SP>SERIAL<SP>:<SP><STATUS>,<SP>VER<SP>:

where:

F = ASCII character F

100 = unit function number

<SP> = space

ST = specify ST command

FLASH/CRC = specify flash checksum result

RAM = specify RAM test result

SERIAL = specify Utility Port test result.

VER = specify version test result. This test compares the

version of the code against the version recorded in

Non-Volatile memory

<STATUS> = is either ASCII PASS or FAIL

,=ASCII comma

:=ASCII colon

<CR><LF> = output line terminator

An example of the response is:

F100 ST flash/CRC : PASS, Ram : PASS, Serial : PASS, Ver :

PASS<CR><LF>

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 147 148

No comments

Symmetricom Time Server User Manual Page 79